I made this snowman from jar lids, twigs, buttons, scrap material for scarf, sock for the hat and push pin nose. I punched holes in the lids and bolted them together.

The snowman I made from sprockets and spokes. The sprockets I welded together then painted. The spoke arms are just hot-glued on. I wrapped him in a ribbon scarf and stuck him in a piece of painted door trim. The hat is 2 pieces of scrap wood painted with a slot cut in the bottom.

This star was harder than it looked. I wrestled with it quite a bit to get the shape. I used a chain tool to offset the pins to hold its shape.

I made this Tin Can Snowman today. His body made from various sizes of tin cans and painted white. His arms are twigs, his nose a light bulb and his hat is made from the lids of a spray paint can and a small plastic coffee can. I drilled holes through the bottoms of the tin cans and then ran a long zip-tie through the holes securing it with the end of another zip-tie. Everything else is hot-glued together.
I got the idea for making him from here.

Nova & her Sister made these ornaments from a foam ball and material following instructions found on youtube.